What we do
Monitor the plant before you optimise it
In a Chennai factory, automation usually starts as a monitoring problem rather than a comfort one. Chilled water for process, compressed air, effluent treatment and the electrical distribution all matter more than the office thermostat, and the first useful deliverable is a screen that shows what is running and what it is costing. Optimisation comes after somebody trusts the readings.
That ordering matters. A control sequence written before the plant's actual behaviour is understood tends to fight the process — staging chillers on a schedule when production varies by shift, for example. We commission the monitoring layer first, watch it for a period, and then write the sequences against evidence.
What we deliver
- Monitoring of process cooling, compressed air and utility plant on one screen
- Energy sub-metering by line, by building and by shift
- Chiller and pump sequencing written after the load profile is understood
- Integration with existing PLCs and drives over the protocols they expose
- CCTV, access control and intercom with a single alarm list
- Commissioning records that show what was tested and what it did



Selecting a Chennai automation contractor
Industrial automation and building automation are different trades that are often sold as one. Ask whether the team has integrated a PLC or a drive, because a factory's control landscape is not a BACnet office. Ask what happens when the network fails, since a plant that stops because the BMS head-end rebooted is worse than one with no BMS at all.
Failure modes matter more than features
In a plant the important questions are what the system does when a sensor fails, when the network drops, and when somebody switches the panel to manual. Those behaviours belong in the sequence of operation, and they should be tested before handover, not discovered during a breakdown.
The plant and the building
Process automation and building services usually meet at the electrical distribution and the cooling plant. Our Chennai electrical page covers the distribution side and the MEP page covers the interface between them.
Sectors
What Chennai asks for
Chennai's automation work is industrial before it is commercial: automotive and electronics plants, process units and the utilities that support them, alongside IT campuses along the OMR. In the plants the value comes from monitoring energy and process cooling; in the campuses it comes from tenant metering and comfort control.
Local authorities a Chennai project has to satisfy
- Power
- TANGEDCO — load sanction, inspection and metering
- Fire
- Tamil Nadu Fire and Rescue Services — NOC
- Municipal
- Greater Chennai Corporation & CMDA — plan approvals
No published Chennai automation project. The published Chennai record is Amazon fulfilment work delivered inside a multi-city programme.
Frequently asked questions
Can you integrate with our existing PLCs?
Do we need a BMS in a factory?
What happens if the network goes down?
Chennai
Other services in Chennai
The same team and the same contract across the disciplines this site covers.
Pan-India
Explore our locations
Find out more about Mindtech in each city, or send us the site address and we will come back with scope, programme and budget.
Get started
Talk to our engineering team
Send us the drawings or the site address in Chennai and we will come back with scope, programme and budget.